About AOS   AOS Technology   Services & Capabilities   Markets Served   What's New   Contact Us   Site Map   Home

Multi-Order Diffractive (MOD) Lens Technology

A conventional diffractive-optic lens utilizes a single diffraction order in which the optical power of the lens is directly proportional to the wavelength of light, see Fig. 1(a). Therefore with white light illumination, every wavelength focuses at a different distance from the lens.  With broadband illumination this strong wavelength dependence in the optical power produces significant chromatic aberration in the image.  For example, if one were to focus the green image onto a detector (or retina), the corresponding red and blue images would be significantly out of focus and would produce red and blue halos around the focused green image. The result with white light illumination is a highly chromatically aberrated image with severe color banding observed around edges of objects; which is, of course, completely unacceptable.

The key feature of a multi-order diffractive (MOD) lens is that it is designed to bring multiple wavelengths to a common focus with high efficiency, and is thereby is capable of forming sharp, clear images in white (or broadband) illumination.  As illustrated in Fig. 1(b), with a MOD lens the various diffractive orders bring different wavelengths to the common focal point.

With white light illumination every wavelength focuses at a different distance from the lens.

Fig. 1.  (a) A conventional diffractive lens is highly dispersive and focuses different wavelengths of light to different focal positions; (b) A MOD lens brings multiple wavelengths across the visible spectrum to a common focal point, and is thereby capable of forming high-quality images in white light.

A MOD lens consists of concentric annular Fresnel zones (see Fig. 2). The step height at each zone boundary is designed to produce a phase change of 2Ï€p in the emerging wavefront, where p is an integer greater than one.  Since the MOD lens is purely diffractive, the optical power of the lens is determined solely by choice of the zone radii, and is independent of lens thickness.  Also, because a MOD lens has no refractive power, it is completely insensitive to changes in curvature of the substrate.

 The key feature of a multi-order diffractive (MOD) lens is that it is designed to bring multiple wavelengths to a common focus with high efficiency, and is thereby is capable of forming sharp, clear images in white (or broadband) illumination

Fig. 2.  Cross section of a multi-order diffractive (MOD) lens.  The phase jump at the edge of the various zones is 2Ï€p, where p is an integer.  The zone radii, rj, are obtained by solving the equation f(rj) = 2Ï€pj, where f(r) represents the desired phase function for the lens.

To illustrate its operation, consider the case of a MOD lens operating in the visible wavelength range with p = 10. Figure 3 illustrates the wavelength dependence of the diffraction efficiency (with material dispersion neglected). Note that several wavelengths within the visible spectrum exhibit 100% diffraction efficiency.  As noted above, the principal feature of the MOD lens is that it brings the light associated with each of these high efficiency wavelengths to a common focal point; hence is capable of forming high quality white-light images.  For reference, the photopic and scotopic visual sensitivity curves are also plotted in Fig. 3. Note that with the p = 10 design, high diffraction efficiencies occur near the peak of both visual sensitivity curves.

 

Fig. 3.  Diffraction efficiency versus wavelength for a p = 10 MOD lens.

The performance that can be achieved using MOD lens technology is illustrated in Fig. 4.

Aspheric
Refractive Lens

 

MOD 20 Lens
(p=20)

 

 

 


Fig. 4.  Performance comparison between an aspheric refractive lens and a MOD 20 lens.

MOD lens technology provides high-quality imaging at a low cost. MOD lenses can be injection molded, replicated onto a glass substrate using a UV-cured optical polymer; or transferred directly into the substrate using reactive-ion etching (RIE) techniques.

Let us show you how we can put Apollo’s MOD lens technology to work for you.

MOD Lens Applications

  • Vision Correction –
    • Spectacles, contact lenses, intraocular lenses (phakic and pseudophakic)
    • Myopia, hyperopia, presbyopia, astigmatism correction
  • Color laser projection displays
  • Light-weight, low-cost infrared imaging
  • Photolithographic alignment systems
  • Laser surgery

Top

330 Clay Road • Rochester, NY 14623 • 585-272-6170 • Fax: 585-272-6177•